With no slide or rotate part, our product can attain to very good efficiency even with some pumping abrasion come of high adhesive liquid with low flow rate
The pressure or the outlet of our product could be regulated when the machine is running, there is no necessary to buy any high cost speed changeable motor or drive device. Our product is applicable to various cases
We let the power consumption follow the pumping curve to reduce the waste of power. This is very useful if we need to vary pumping conduction regularly.
It won't cause any damage if our product is running with no input for a long time.
The input pressure will never excess the output pressure. No necessary to buy any pressure release device or by-pass.
The outlet of our pump can be closed in any time if necessary. Our pump will stop immediately and won't cause any power waste, heat production or any abrasion damage. If you want to start the pump again, just open the outlet of the pump and it will start automatically.
The efficiency of our pump will never reduced by any abrasion.
Manual, remote or automatic control can be used to regulate the pumping output.
In normal condition, our product is applicable to the environment that may causes explosion very well without any explosion resist motor or controller.
The flow rate regulation is controlled by air valve without any reflux device.
Our pump is a diaphragm power driver with pressure balance well, and our diaphragm of quality isn't easy to be damage.
Our product is small and light, could be move to any place easily.